You are here: Home » Boiler Tubes » Alloy tube » Alloy Tube(EN10216-2)
Alloy Tube(EN10216-2)

Alloy Tube(EN10216-2)Alloy Tube EN10216-2 Application:

Alloy tube EN10216-2 is widely used for boiler, superheater, shell & tube bundle heat-exchanger, condenser and similar heat transfer equipments.

 

Alloy Tube EN10216-2 Standard: EN10216-2

OD: 12.7-177.8 mm

WT:2.2-15 mm

Length: 25 meters(Max)

Fabricating Process: Seamless & Cold drawn & Cold rolled

Heat Treatment: Annealed & Normalized

Non-destructive test:  100% Eddy Current Test

Package: Bundle package or plywood box

General Name:EN10216-2 Seamless Steel Tubes for Pressure Purposes

 

Alloy Tube EN10216-2  Technical Parameters:

Standead   Grade Chemical  Composition%
C Mn P S Si Cr Mo
EN10216-2 16Mo3 0.12-0.20 0.04-0.80 ≤0.030 ≤0.030 0.10-0.35 0.25-0.35
13CrMo45 0.10-0.18 0.04-0.70 ≤0.030 ≤0.030 0.10-0.35 0.70-1.10 0.44-0.65
10CrMo910 0.08-0.15 0.04-0.70 ≤0.030 ≤0.030 ≤0.50 2.00-2.50 0.90-1.20

 

Standead   Grade  Chemical Composition%
Tensile Strength(Mpa) Yield Strength(Mpa) Elongation(%)
EN10216-2 16Mo3 450-600 ≥270 ≥20
13CrMo45 440-590 ≥290 ≥20
10CrMo910 450-600 ≥280 ≥18
Category: Alloy tube,Boiler Tubes

Leave a Reply

Your email address will not be published. Required fields are marked *